pnp

The video walks you through an installation of Cat8KV Catalyst SD-WAN device on VMware ESXi. The process will be covered end-to-end from adding device to PnP Connect Portal, install a virtual router instance, to bootstrapping the router using a default Device Template. This router will be used at a second template site in our lab.

The video walks you through an installation of Cat8KV Catalyst SD-WAN device on VMware ESXi. The process will be covered end-to-end from adding device to PnP Connect Portal, install a virtual router instance, to bootstrapping the router using a default Device Template. This router will be used at a second template site in our lab.

The video walks you through a process of bringing up our first Cisco SD-WAN device using manual bootstrap. We will start with a router conversion from autonomous to controller mode. We will demonstrate three different ways to add devices to SD-WAN Manager and bootstrap a router using CLI. The router will have control connections to the controllers by the end of this lab.

The video walks you through a process of bringing up our first Cisco SD-WAN device using manual bootstrap. We will start with a router conversion from autonomous to controller mode. We will demonstrate three different ways to add devices to SD-WAN Manager and bootstrap a router using CLI. The router will have control connections to the controllers by the end of this lab.

The video walks you through an Embedded Wireless Controller on AP provisioning on Cisco DNAC 2.1. We will cover the entire process of AP conversion, PnP onboarding, network profile configuration, and config deployment. Testing will be performed on enterprise 802.1x and guest SSID.

The video walks you through an Embedded Wireless Controller on AP provisioning on Cisco DNAC 2.1. We will cover the entire process of AP conversion, PnP onboarding, network profile configuration, and config deployment. Testing will be performed on enterprise 802.1x and guest SSID.

The video walks you through an Embedded Wireless Controller on AP provisioning on Cisco DNAC 2.1. We will cover the entire process of AP conversion, PnP onboarding, network profile configuration, and config deployment. Testing will be performed on enterprise 802.1x and guest SSID.

The video walks you through an Embedded Wireless Controller on AP provisioning on Cisco DNAC 2.1. We will cover the entire process of AP conversion, PnP onboarding, network profile configuration, and config deployment. Testing will be performed on enterprise 802.1x and guest SSID.

The video shows you an onboarding process of a Fabric Extended node on a SDA fabric using Cisco DANC 2.1. We will go through required configuration to prep uplink interfaces and use DHCP option 43 to facilitate DNAC discovery. Endpoints will be tested with 802.1x authentication and SGT on the Fabric Extended node.

The video shows you an onboarding process of a Fabric Extended node on a SDA fabric using Cisco DANC 2.1. We will go through required configuration to prep uplink interfaces and use DHCP option 43 to facilitate DNAC discovery. Endpoints will be tested with 802.1x authentication and SGT on the Fabric Extended node.