external tep

The video walks through configuring an Inter-Site Network (ISN) for ACI 6.0 Multi-Site using NDO. We will begin by reviewing ISN requirements. We will use Site-to-Site Connectivity wizard on NDO to define spine interface parameters, External TEP unicast and multicast anycast IP pools, OSPF interface policies, and iBGP peering settings for each site. The lab verifies the ISN and show Fabric Interconnect status.

The video walks through configuring an Inter-Site Network (ISN) for ACI 6.0 Multi-Site using NDO. We will begin by reviewing ISN requirements. We will use Site-to-Site Connectivity wizard on NDO to define spine interface parameters, External TEP unicast and multicast anycast IP pools, OSPF interface policies, and iBGP peering settings for each site. The lab verifies the ISN and show Fabric Interconnect status.

The video demonstrates how to establish ACI Multi-Pod connectivity over an Inter-Pod Network (IPN) in Cisco ACI 6.0. I begin with an overview of  the IPN requirements. The "Add Pod" wizard is used to configure spine-to-IPN interface parameters, External TEP pools, OSPF interface policies, and QoS DSCP marking, after which we will register Pod 2 spine and leaf switches. We will review how multicast enables cross-pod BUM flooding and how MPBGP/EVPN synchronizes endpoint databases between pods via iBGP peering between spines.

The video demonstrates how to establish ACI Multi-Pod connectivity over an Inter-Pod Network (IPN) in Cisco ACI 6.0. I begin with an overview of  the IPN requirements. The "Add Pod" wizard is used to configure spine-to-IPN interface parameters, External TEP pools, OSPF interface policies, and QoS DSCP marking, after which we will register Pod 2 spine and leaf switches. We will review how multicast enables cross-pod BUM flooding and how MPBGP/EVPN synchronizes endpoint databases between pods via iBGP peering between spines.

The video demonstrates how to establish ACI Multi-Pod connectivity over an Inter-Pod Network (IPN) in Cisco ACI 6.0. I begin with an overview of  the IPN requirements. The "Add Pod" wizard is used to configure spine-to-IPN interface parameters, External TEP pools, OSPF interface policies, and QoS DSCP marking, after which we will register Pod 2 spine and leaf switches. We will review how multicast enables cross-pod BUM flooding and how MPBGP/EVPN synchronizes endpoint databases between pods via iBGP peering between spines.

The video demonstrates how to set up a two-pod ACI Multi-Pod fabric using direct back-to-back spine connections on Cisco ACI 6.0. We will be using Pod configuration wizard to automate spine interface configuration, External TEP pool allocation, and OSPF point-to-point interface policy creation. Once both pods are brought up and configured, we will perform connectivity testing.

The video demonstrates how to set up a two-pod ACI Multi-Pod fabric using direct back-to-back spine connections on Cisco ACI 6.0. We will be using Pod configuration wizard to automate spine interface configuration, External TEP pool allocation, and OSPF point-to-point interface policy creation. Once both pods are brought up and configured, we will perform connectivity testing.