Routing & Switching

The video focuses on two features on Cisco Nexus 1000V: vTracker, and AAA. We will go through vTracker command outputs, and review the type of information that can be obtained. We will then configure Nexus 1000V to authenticate user through TACACS+ against a Cisco ACS 5.4 server.

• vTracker
• AAA with TACACS+
• Cisco ACS

The video walks you through basic configuration on a Cisco Nexus 1000V after a fresh install. In addition, we will cover three main management items: Syslog, NTP, and SNMPv3. We will finishes off the video by verifying our config with Syslog server and SNMP poller.

• Nexus 1000V Basic Configuration
• DNS
• Syslog,
• NTP
• SNMPv3

The video walks you through Cisco Nexus 1000V installation in Layer 3 mode using InstallerApp to install both VSM and VEM. We will see how the installation process has become automated. There are pros and cons to this method, which we will observe and discuss throughout the video. This lab takes what we have discussed on the Nexus 1000V introduction video, and applies them into actual implementation. 

The video walks you through Cisco Nexus 1000V installation in Layer 3 mode using InstallerApp to install both VSM and VEM. We will see how the installation process has become automated. There are pros and cons to this method, which we will observe and discuss throughout the video. This lab takes what we have discussed on the Nexus 1000V introduction video, and applies them into actual implementation. 

The video walks you through Cisco Nexus 1000V installation in Layer 3 mode. We will explore various methods to install both VSM and VEM so you can be aware of steps involved and determine which method will work best in your deployment. This lab takes what we have discussed on the Nexus 1000V introduction video, and applies them into actual implementation. 

The video walks you through Cisco Nexus 1000V installation in Layer 3 mode. We will explore various methods to install both VSM and VEM so you can be aware of steps involved and determine which method will work best in your deployment. This lab takes what we have discussed on the Nexus 1000V introduction video, and applies them into actual implementation. 

The video walks you through Cisco Nexus 1000V installation in Layer 2 mode. We will explore various methods to install both VSM and VEM so you can be aware of steps involved and determine which method will work best in your deployment. This lab takes what we have discussed on the Nexus 1000V introduction video, and applies them into actual implementation. 

The video walks you through Cisco Nexus 1000V installation in Layer 2 mode. We will explore various methods to install both VSM and VEM so you can be aware of steps involved and determine which method will work best in your deployment. This lab takes what we have discussed on the Nexus 1000V introduction video, and applies them into actual implementation. 

The video introduces you to the concept behind Cisco Nexus 1000V. You will be able to understand the basic components that make up Cisco Nexus 1000V switch and their interaction, which is a prerequisite for our future Nexus 1000V labs. This is an introduction-to-technology video so there will be no lab.

• Cisco Nexus 1000V
• Virtual Supervisor Module (VSM)
• Virtual Ethernet Module (VEM)
• System Vlan

The video discusses how NAT affects embedded IP in an application payload as the packet passes through a Cisco NAT router. Two widely used applications: DNS and FTP, are chosen for our demonstration. We go into great detail to analyze FTP protocol behavior using both passive and active mode. Lastly, we look at how a router cope with non-standard FTP port. Wireshark captures are reviewed throughout this video.

• Application-Level NAT (ip nat service)