View Cart
0 Items | Total: US$0.00
Welcome,      Register

You are here

guest

RS0190 - DNAC 2.1 Multi-Site Wireless with FlexConnect (Part 3)

The video walks you through a configuration of FlexConnect wireless on Cisco DNAC 2.1. We will use our second remote site BR2 in this demonstration. The goal is to locally-switch user wireless traffic while utilizing a centralized WLC. We will also be experimenting with dynamic VLAN assignment and ISE guest portal.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0190 - DNAC 2.1 Multi-Site Wireless with FlexConnect (Part 2)

The video walks you through a configuration of FlexConnect wireless on Cisco DNAC 2.1. We will use our second remote site BR2 in this demonstration. The goal is to locally-switch user wireless traffic while utilizing a centralized WLC. We will also be experimenting with dynamic VLAN assignment and ISE guest portal.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0190 - DNAC 2.1 Multi-Site Wireless with FlexConnect (Part 1)

The video walks you through a configuration of FlexConnect wireless on Cisco DNAC 2.1. We will use our second remote site BR2 in this demonstration. The goal is to locally-switch user wireless traffic while utilizing a centralized WLC. We will also be experimenting with dynamic VLAN assignment and ISE guest portal.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0179 - DNAC 2.1 Guest Anchor (Part 4)

The video shows two ways that you can design guest fabric-enabled wireless in SDA using Cisco DNAC 2.1. The first method is to treat guest like any other VN and have traffic exit a border node. The second method is to have guest traffic tunneled to a dedicated guest border node in a DMZ. We will take a Wireshark packet capture and perform an analysis. The video ends with a demonstration to have wired guest also utilize the guest border node.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0179 - DNAC 2.1 Guest Anchor (Part 3)

The video shows two ways that you can design guest fabric-enabled wireless in SDA using Cisco DNAC 2.1. The first method is to treat guest like any other VN and have traffic exit a border node. The second method is to have guest traffic tunneled to a dedicated guest border node in a DMZ. We will take a Wireshark packet capture and perform an analysis. The video ends with a demonstration to have wired guest also utilize the guest border node.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0179 - DNAC 2.1 Guest Anchor (Part 2)

The video shows two ways that you can design guest fabric-enabled wireless in SDA using Cisco DNAC 2.1. The first method is to treat guest like any other VN and have traffic exit a border node. The second method is to have guest traffic tunneled to a dedicated guest border node in a DMZ. We will take a Wireshark packet capture and perform an analysis. The video ends with a demonstration to have wired guest also utilize the guest border node.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0179 - DNAC 2.1 Guest Anchor (Part 1)

The video shows two ways that you can design guest fabric-enabled wireless in SDA using Cisco DNAC 2.1. The first method is to treat guest like any other VN and have traffic exit a border node. The second method is to have guest traffic tunneled to a dedicated guest border node in a DMZ. We will take a Wireshark packet capture and perform an analysis. The video ends with a demonstration to have wired guest also utilize the guest border node.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0178 - DNAC 2.1 Wireless Non-Fabric Mode (Part 3)

The video shows you how to configure non-fabric (aka Over-The-Top) wireless on Cisco DNAC 2.1. We will use DNAC to provision enterprise 802.1x wireless and guest with Central Web Auth (CWA) to authenticate against Cisco ISE. We will configure IP-Based ACL on DNAC to restrict network access on wireless client. Lastly, we will demonstrate an option of sending guest traffic to an anchor WLC.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0178 - DNAC 2.1 Wireless Non-Fabric Mode (Part 2)

The video shows you how to configure non-fabric (aka Over-The-Top) wireless on Cisco DNAC 2.1. We will use DNAC to provision enterprise 802.1x wireless and guest with Central Web Auth (CWA) to authenticate against Cisco ISE. We will configure IP-Based ACL on DNAC to restrict network access on wireless client. Lastly, we will demonstrate an option of sending guest traffic to an anchor WLC.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0178 - DNAC 2.1 Wireless Non-Fabric Mode (Part 1)

The video shows you how to configure non-fabric (aka Over-The-Top) wireless on Cisco DNAC 2.1. We will use DNAC to provision enterprise 802.1x wireless and guest with Central Web Auth (CWA) to authenticate against Cisco ISE. We will configure IP-Based ACL on DNAC to restrict network access on wireless client. Lastly, we will demonstrate an option of sending guest traffic to an anchor WLC.

Rating: 
0
No votes yet
Difficulty Level: 
3

Pages

Subscribe to RSS - guest