View Cart
0 Items | Total: US$0.00
Welcome,      Register

You are here

dnac

RS0178 - DNAC 2.1 Wireless Non-Fabric Mode (Part 1)

The video shows you how to configure non-fabric (aka Over-The-Top) wireless on Cisco DNAC 2.1. We will use DNAC to provision enterprise 802.1x wireless and guest with Central Web Auth (CWA) to authenticate against Cisco ISE. We will configure IP-Based ACL on DNAC to restrict network access on wireless client. Lastly, we will demonstrate an option of sending guest traffic to an anchor WLC.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0177 - DNAC 2.1 Wireless Fabric Mode (Part 4)

The video shows you how to configure fabric-enabled wireless on Cisco DNAC 2.1. We will go through design, provisioning and testing WLC and AP. You will see configuration automation the DNAC performs. Security policy is enabled to enforce consistent access security on wireless client as on wired network. We will also review captured packet from an AP.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0177 - DNAC 2.1 Wireless Fabric Mode (Part 3)

The video shows you how to configure fabric-enabled wireless on Cisco DNAC 2.1. We will go through design, provisioning and testing WLC and AP. You will see configuration automation the DNAC performs. Security policy is enabled to enforce consistent access security on wireless client as on wired network. We will also review captured packet from an AP.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0177 - DNAC 2.1 Wireless Fabric Mode (Part 2)

The video shows you how to configure fabric-enabled wireless on Cisco DNAC 2.1. We will go through design, provisioning and testing WLC and AP. You will see configuration automation the DNAC performs. Security policy is enabled to enforce consistent access security on wireless client as on wired network. We will also review captured packet from an AP.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0177 - DNAC 2.1 Wireless Fabric Mode (Part 1)

The video shows you how to configure fabric-enabled wireless on Cisco DNAC 2.1. We will go through design, provisioning and testing WLC and AP. You will see configuration automation the DNAC performs. Security policy is enabled to enforce consistent access security on wireless client as on wired network. We will also review captured packet from an AP.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0176 - DNAC 2.1 Fabric Extended Node (Part 2)

The video shows you an onboarding process of a Fabric Extended node on a SDA fabric using Cisco DANC 2.1. We will go through required configuration to prep uplink interfaces and use DHCP option 43 to facilitate DNAC discovery. Endpoints will be tested with 802.1x authentication and SGT on the Fabric Extended node.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0176 - DNAC 2.1 Fabric Extended Node (Part 1)

The video shows you an onboarding process of a Fabric Extended node on a SDA fabric using Cisco DANC 2.1. We will go through required configuration to prep uplink interfaces and use DHCP option 43 to facilitate DNAC discovery. Endpoints will be tested with 802.1x authentication and SGT on the Fabric Extended node.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0175 - DNAC 2.1 Group-Based Access Control (Part 3)

The video shows you how to enable Group-Based Access Control in SDA using Cisco DNAC 2.1. Our scenario begins with a simple configuration to deny traffic between two user groups. We will then use Group-based Policy Analytic to identify type of traffic between endpoints, and leverage the information to restrict communication within the same endpoint group. Wireshark packet capture will be performed to give us an insight into VXLAN packet structure.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0175 - DNAC 2.1 Group-Based Access Control (Part 2)

The video shows you how to enable Group-Based Access Control in SDA using Cisco DNAC 2.1. Our scenario begins with a simple configuration to deny traffic between two user groups. We will then use Group-based Policy Analytic to identify type of traffic between endpoints, and leverage the information to restrict communication within the same endpoint group. Wireshark packet capture will be performed to give us an insight into VXLAN packet structure.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0175 - DNAC 2.1 Group-Based Access Control (Part 1)

The video shows you how to enable Group-Based Access Control in SDA using Cisco DNAC 2.1. Our scenario begins with a simple configuration to deny traffic between two user groups. We will then use Group-based Policy Analytic to identify type of traffic between endpoints, and leverage the information to restrict communication within the same endpoint group. Wireshark packet capture will be performed to give us an insight into VXLAN packet structure.

Rating: 
0
No votes yet
Difficulty Level: 
3

Pages

Subscribe to RSS - dnac