View Cart
0 Items | Total: US$0.00
Welcome,      Register

You are here

WL0007 - WLC Access Point Basic Configuration (Part 1)

Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0
Lab Document: 
<Please login to see the content>
Video Download: 
Title: WL0007 - Video Download $11.00
Purchase WL0007 - Video Download $11.00
The video walks you through configuration of access points on Cisco Wireless LAN Controller. We will setup our system to support controller and access point communication using multicast-multicast mode. The remaining part of the lab goes through access point global and specific configurations including per-access point radio settings. 
 
Part 1 of this video covers multicast mode, AP global and specific configuration
 
Topic:
  • AP Multicast Mode (Multicast-Milticast)
  • AP Fall back
  • AP Global Configuration (Login Credential, Failover Priority, HA etc.)
  • AP Specific Configuration
  • AP Radio Configuration

About Author

Metha Cheiwanichakorn, CCIE#23585 (RS, Sec, SP), is a Cisco networking enthusiast with years of experience in the industry. He is currently working as a consulting engineer for a Cisco partner. As a founder of and an instructor at labminutes.com, Metha enjoys learning and challenges himself with new Cisco technologies.

5 comments

What is the difference between the centralized switching and local switching in Cisco WLC 7500

What scenarios will we select multi-casting and what scenario will choose uni-casting and which one is better.

Multicast mode is always preferred as long as your wired network supports multicast. In fact, some WLC model and code only have multicast option available. 

If i enabled AP multicasting in the controller, should need the multicasting in switch also. and what is the "ip pim sparse-dense-mode" and what is the use of this command.

Yes.. Multicast must be enabled between AP and WLC. 

Lab Minutes Classifieds