Datacenter

This video demonstrates L3 Policy-Based Redirect (PBR) in Cisco ACI 6.0. The lab walks through six scenarios: FW insertion between ESGs in different subnets, between ESGs on the same subnet, intra-ESG traffic inspection, vzAny policy to enforce FW across all inter-ESG flows, Service EPG selector to control access to the FW subnet, and PBR to an L3OUT. The goal is to demonstrate the flexibility of PBR option compared to the traditional service insertion we covered in previous labs.

This video demonstrates L3 Policy-Based Redirect (PBR) in Cisco ACI 6.0. The lab walks through six scenarios: FW insertion between ESGs in different subnets, between ESGs on the same subnet, intra-ESG traffic inspection, vzAny policy to enforce FW across all inter-ESG flows, Service EPG selector to control access to the FW subnet, and PBR to an L3OUT. The goal is to demonstrate the flexibility of PBR option compared to the traditional service insertion we covered in previous labs.

This video demonstrates L3 Policy-Based Redirect (PBR) in Cisco ACI 6.0. The lab walks through six scenarios: FW insertion between ESGs in different subnets, between ESGs on the same subnet, intra-ESG traffic inspection, vzAny policy to enforce FW across all inter-ESG flows, Service EPG selector to control access to the FW subnet, and PBR to an L3OUT. The goal is to demonstrate the flexibility of PBR option compared to the traditional service insertion we covered in previous labs.

This video covers Policy-Based Redirect (PBR) for L1 and L2 inline service devices in Cisco ACI 6.0. L1 PBR is demonstrated with a physical FTD in inline IPS mode between ESGs in different BDs, while L2 PBR uses a virtual FTD in transparent mode between ESGs on the same subnet. The key advantages over traditional Service Graph modes are that endpoints do not need to be split into new BDs, the FW does not need to be the default gateway, and a single service graph can be shared by multiple ESG pairs.

This video covers Policy-Based Redirect (PBR) for L1 and L2 inline service devices in Cisco ACI 6.0. L1 PBR is demonstrated with a physical FTD in inline IPS mode between ESGs in different BDs, while L2 PBR uses a virtual FTD in transparent mode between ESGs on the same subnet. The key advantages over traditional Service Graph modes are that endpoints do not need to be split into new BDs, the FW does not need to be the default gateway, and a single service graph can be shared by multiple ESG pairs.

This video covers Policy-Based Redirect (PBR) for L1 and L2 inline service devices in Cisco ACI 6.0. L1 PBR is demonstrated with a physical FTD in inline IPS mode between ESGs in different BDs, while L2 PBR uses a virtual FTD in transparent mode between ESGs on the same subnet. The key advantages over traditional Service Graph modes are that endpoints do not need to be split into new BDs, the FW does not need to be the default gateway, and a single service graph can be shared by multiple ESG pairs.

This video demonstrates how to insert a transparent virtual FTD firewall between endpoints on the same subnet using Go-Through mode Service Graph in Cisco ACI 6.0. In the Go-Through mode, FW bridges traffic between two BDs without acting as a default gateway. The lab shows configuration of Service Graph and applying the graph between ESGs with a use of VMM integration. A second scenario shows that Service Graph also works with uSeg EPGs, a capability not supported in earlier ACI versions.

This video demonstrates how to insert a transparent virtual FTD firewall between endpoints on the same subnet using Go-Through mode Service Graph in Cisco ACI 6.0. In the Go-Through mode, FW bridges traffic between two BDs without acting as a default gateway. The lab shows configuration of Service Graph and applying the graph between ESGs with a use of VMM integration. A second scenario shows that Service Graph also works with uSeg EPGs, a capability not supported in earlier ACI versions.

This video demonstrates how to insert a physical firewall into traffic flows using Go-To mode Service Graph in Cisco ACI 6.0. In the Go-To mode, the FW takes over as the default gateway while ACI provides L2 connectivity between endpoint BDs and the FW. The lab covers building all required physical and logical constructs then applying the graph between ESGs. A second scenario extends the setup to allow WEB and APP ESGs to reach external networks through the FW as a transit L3OUT.

This video demonstrates how to insert a physical firewall into traffic flows using Go-To mode Service Graph in Cisco ACI 6.0. In the Go-To mode, the FW takes over as the default gateway while ACI provides L2 connectivity between endpoint BDs and the FW. The lab covers building all required physical and logical constructs then applying the graph between ESGs. A second scenario extends the setup to allow WEB and APP ESGs to reach external networks through the FW as a transit L3OUT.